示例图片二

机场也要用到抛丸机

  抛丸机在机场的应用:在水平外表运用抛丸技能是美国海军首要运用的,意图是铲除飞机在甲板上残留的橡胶印。但该技能的运用却遭到其时出产和机器可用的动力体系的匮乏,并没有立刻在实践中推行。最近几年, 我公司研发出产了一系列的抛丸机,该技能的推行,使得机场和路途维护方法都起了很大的革新,削减了防滑问题和轮胎水溅引起的事故隐患。

  技能的描绘

  抛丸技能包括经过1个或多个涡轮向处理外表喷发铁微珠(直径1.7-2mm). 在喷发时,铲除外表较软的部分,形成极端浅表的不规则”橘皮”结构. 喷发的微珠和废物被和抛丸机相连的吸尘器吸入,一种特殊过滤体系.铁微珠会被主动从废物中别离,清洗并回到微珠循环. 废物别离到输出箱内. 为确保微珠的收回,附加特别的高马力吸尘器(是和机器不可分割的一部分) 可和抛丸机平行作业。 提供在水平跑道上运用抛丸技能铲除以下问题

  除 胶

  多数的轮胶都堆积在飞机跑道的敏感部位如着陆和起飞带上. 该区是事故多发区,特别是阴雨天,有许多理由:在跑道外表堆积,累积的橡胶材料削减乃至排除了标线应有的微观或微观防滑性,形成外表打滑或与飞机轮胎间无缝隙。

抛丸机

  The application of shot blasting machine in airports: the use of shot blasting skills on the horizontal surface is the most important application of the US Navy, and the purpose is to eradicate the remaining rubber imprints on the deck. However, the use of this skill is deficient in the production of time and the power system available to the machine, and it has not been carried out in practice immediately. In recent years, our company has developed a series of shot blasting machines. The implementation of this technology has greatly improved the airport and road maintenance methods, reducing the skid resistance and the accidents caused by tire splashing.

  A description of the skill

  After blasting skills include 1 or more to the appearance of iron turbine eruption beads (1.7-2mm diameter). The eruption, eradicate the appearance than the soft parts, forming irregular "extreme shallow orangepeel" structure. The vacuum cleaner eruption of beads and waste are connected and shot blasting machine suction, a special filtration system. Iron bead will be active from waste separation, cleaning and back bead cycle. The waste to the output. In order to ensure the separation box back bead, additional special high horsepower cleaner (and machine is an integral part of) and parallel operation of shot blasting machine. Eliminate the following problems by using shot throwing skills in a horizontal runway

  Degumming

  Most of the rubber wheel are piling up in sensitive areas such as the runway landing and take-off belt. This area is the accident prone areas, especially in the rainy days, there are many reasons that piled up on the runway looks, the accumulation of rubber material and cut out the micro or micro slip marking, the formation of the appearance of skid or aircraft there is no clearance between the tire.